Belling Gas hobs Servisní příručka stáhnout pdf (Strana 19)

Installation advice - cabinetry

Dealing with sides, cross- rails

a

nd back-panels in cabinetry

Depending on the cabinets, the wor k-

top thickness and the hob positioning,

it is possible for the hob base, the

clamp brackets and/or the gas con -

nection to interfere with parts of the

cabinet. These ca n b e dealt w ith a s

follows:

Cabinet sides

If the hob is to be installed across the

top of two cabinet housing units, then

the base of the hob may interfere with

the sides of these units. It will be nec-

essary to cu t away the top of the unit

sides locally to clear the ho b, cl amp

brackets and/or gas connection.

Cross-Rails

1. Interference with hob base

If there are any cross-rails which

obstruct the hob base by running

across the worktop cutout, they can

simply be removed or locally cut-

away to allow the hob to be

installed, depending on the partic-

ular installation. Any modifications

must ensure that the strength of the

cabinet is maintained.

2. Interference with clamp brackets

If the re are any cross-rails which

prevent the clamps from being

positioned on the front or rear

edges of the hob, then they can be

removed or locally cut-away

around the brackets to allow the

brackets to be installed.

Any modifications must ensure that

the strength of the cabinet is main-

tained.

Back-panel

1.

Interference with clamp brackets

If the cabinet has a back-panel

which prevents the clamps from

being positioned on the rear edge

of the hob, then this p anel can be

completely rem oved or locally cut-

away to a llow the brackets to be

installed.

2. Interference or restriction of gas

connection

If the cabinet has a back-panel

which interferes with the position

of the gas supply to t he hob, then

the panel can be completely

removed or locally cut-away to

allow connection to the gas sup-

ply.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Komentáře k této Příručce

Žádné komentáře